Mazda-speed.com

Mazdaspeed Archive => FAQ Completed => Topic started by: JCALD on October 16, 2015, 02:04:10 PM



Title: ROSTRA CRUISE WIRING FOR OEM STALK AND SWITCH
Post by: JCALD on October 16, 2015, 02:04:10 PM
Here is my final wiring diagram for using the factory cruise stalk and main switch.  This also includes wiring the "Cruise" light in the instrument cluster.  The light is already in the cluster so all you have to do is insert the connector (you fabricate) into slot 1B of the largest cluster plug to get it to work.  I have included pics of the fabricated connector for your entertainment.

(http://www.mazda-speed.com/albums/04-MSM-IN-GRANBURY/ROSTRA_WIRING.jpg)
Wiring diagram showing factory stalk, switch, and cruise light connections.


(http://www.mazda-speed.com/albums/04-MSM-IN-GRANBURY/IMG_4220.jpg)
.016" thick brass cut and filed to fit slots in gauge cluster plug.


(http://www.mazda-speed.com/albums/04-MSM-IN-GRANBURY/IMG_4224.jpg)
Brass connector with bends and wire soldered on.


(http://www.mazda-speed.com/albums/04-MSM-IN-GRANBURY/IMG_4225.jpg)
Finished connector ready to install.