Mazda-speed.com
December 08, 2023, 03:09:28 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Mazda-speed.com is no longer open and is now a read-only site. For Mazdaspeed Miata discussions, please visit the Mazdaspeed section on Miata.net.
 
   Home   Help Login Register  
Mazda-speed.com > Mazdaspeed Archive > FAQ and How To(In Progress) > Topic: MSM Part Number for Shifter Bushing
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: MSM Part Number for Shifter Bushing  (Read 12369 times)
0 Members and 1 Guest are viewing this topic.
4d-SPORT
L Barry Chafin
Second Gear
**
Posts: 81


Driving 4 donations 2 fight Childhood Cancer.


WWW
« on: April 10, 2007, 04:08:06 PM »
Just picked up my car from the Dealer's Service Department and here's the part number for the bushing they replaced under warranty:

Y601-17-515

The number checks out OK on my http://www.MazdaMotorsports.com Shopping Cart ($5.05 is the team member price).

Cheers,

Barry
« Last Edit: May 21, 2007, 10:02:37 AM by Keeper of the FAQs » Logged
Barry- Team COOPER - fight Neuroblastoma



'04 RX-8 T1 (B-Stock) #140
- http://www.4d-sport.com/images/900_ExitLaguna11CokeRoad.jpg

'04 MS MX-5 T1 (C-Stock) #142
- http://www.4d-sport.com/images/900_Mazda_Cha-Chow_Crop.jpg
revlis240
Third Gear
***
Posts: 233


Everything happens for a reason.
« Reply #1 on: July 12, 2008, 03:32:19 AM »
i just did mine today. found the bushing totally intact, just popped off. either way, a washer from lowes took care of that issue and now the shifter is WONDERFUL!!!
Logged
#1241 of 1428 in TiGray | AEM Intake | Ebay FMIC | MBC at 10psi | Forge BOV | Begi TB Inlet | 315cc Injectors | Ebay Elbow | PCV Bypassed |

#598 of 1428 in Lave Orange! | FM Intake | MBC at 10psi | ebay Forge style BOV | PCV Bypassed | Hydra 2.5 Install pending | 550cc injector install pending | FM LBBK | Magnaflow 2.5" Catback Exhaust | Ebay Elbow & Downpipe
emexfive
Fifth Gear
*****
Posts: 4576
« Reply #2 on: July 13, 2008, 02:08:11 AM »
Mine was nice and snug, not to mention in good shape. I wonder if the washer would still be a good thing? But mine is now shifting wonderfully like before my shifter turret top got loose, so I'll leave it as is.
Logged
Black mica 05, Full FM DP/exhaust, BEGI CAI intake and FMIC, Hydra, 550 injects, Wilwood/Racing Brake big brakes, 16" Volk TE37s with 225/40 T1-Rs. Ohlins DFV coilovers, etc, etc...
pmburke80
Third Gear
***
Posts: 156
« Reply #3 on: January 09, 2009, 02:23:00 AM »
I purchased my '04 MSM a year ago with 7000. The shifter over the past year has continued to get worse and i now have 20,000 miles onit. Is it possible that it's the bushing that is causing this? The car wasn't a DD until I purchased it and it has seen more miles this past year than it did in it's first 3 and a half years sitting in a garage. If it is the bushing, I'm going to tear it apart this weekend.
Logged
PURCHASED  4/2014: '05 VR MSM #206 FM Little Enchilada / Reverant MS2e with GM IAT Sensor / Deatschwerks 700cc Injectors / Deatschwerks DW300 fuel pump / FM Crossflow Radiator / Xida 2nd gen coilovers 700/400 / RB 1.125" front sway bar and RB brace kit / 949 endlinks / 949 6UL 15x9 225/45 Hankook RS3's / SS Lines / Motul 660 / CarboTech XP10 / ACT Stg 1 clutch w/Pro-Lite flywheel / MR Short Shifter / Nardi Deep Corn Suede 330mm / M2 Hard Dog DD / 4300k HIDs / 5-speed swap / Advanti Storms 15x9 waiting for slicks     (Dynojet 2/24/15 220hp/222tq).

SOLD 4/2010: '04 Ti MSM #568   Full FM Intake / FM DP / H&R Springs / Stewart-Warner Boost Gauge / 215/40-17 Dunlop Z1 Star Specs
Pages: [1]   Go Up
  Print  
Mazda-speed.com > Mazdaspeed Archive > FAQ and How To(In Progress) > Topic: MSM Part Number for Shifter Bushing
 « previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!

Copyright 2007-2023, Eunos Communications LLC